FunToDo Resins

FunToDo Resins
Click to enlarge
Availability: 50
Model: FunToDo
Average Rating: Not Rated

Standard Blend

Standard Blend Resin

Our Standard Blend resin is a real multi purpose resin, most cost effective for printing your day to day objects. The fully cured resin has a hardness of 35 shore D.

​Available in Red, Black and unpigmented.


Recommended retail price $85+GST each.
 

 

Industrial Blend

The Industrial Blend resin has been developed especially for some industrial clients who were in need for a resin that is extra hard and would maintain its structural integrity while exposed to very Low and High temperatures.
Because of these properties it is one of the few resins perfectly suitable for vulcanisation. 
For relatively low temperature metals like pewter or tin you can also use the Industrial Blend to print your moulds and cast straight from the printed mould. Read all about it in this Instructable

​The hardness of the fully cured resin is 75 shore D.
It has been tested from -45C to +225C.

​Available in Red, Black and unpigmented.

Recommended retail price $105+GST each.

 

Castable Blend

FunToDo Castable resin

The Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.

Available in Red only.

Recommended retail price $125+GST each.

 

Snow White

Snow White is the first resin in this market segment that is white, and stays white!
It has a milky white colour, which makes it an ideal resin for printing architectural designs or other designs where white is the predominant colour.
Combine Snow White with one of our pigments to create any pastel colour you like.
Snow White comes with one free 5ml dropper bottle pigment of your choice: Red, Blue, Yellow or Black. This is enough for 1 kg. resin
 

Snow White has a 83 Shore D hardness and has the look and feel of injection moulded plastic.
The viscosity is about 80 Mpas which makes it also very suitable for Top Down design printers.
Absorption and cure speed are similar to our other blends. 

Recommended retail price $95+GST each. (5ml pigment included)

 

Deep Black

Deep Black has specifically been designed to get the best out of your  High End DLP/SLA machine.
We have combined this special blend with near nano carbon particles, which enables you to print objects in the highest resolutions.
Despite being black, the cure times are just as any other of our fast curing resins.

The Deep Black has a 81 Shore D hardness and, just like Snow White, has the look and heel of injection moulded plastic.
The viscosity is around 80 Mpas, so not only bottom up printers can benefit of the exceptional resolution of Deep Black.

Recommended retail price $115+GST each.

 

F1+

Formlabs Form1 and Form1+ resin

F1+ Blend is the blend especially made for the formlabs Form1 and Form1+ printers.
The F1+ Blend is available in four colours: Clear, White, Grey and Black.
The F1+ is not only compatible with the machine but also with the Formlabs PreForm software. Just choose the appropriate colour and the V01 setting. Then Dial in the layer height. Because of the very high detail of the blend, especially the Black version, astonishing detailed results are achievable at 0.05 and 0.02mm layer height. 

​The F1+ blends are compatible with our pigments. Depending on the pigments added, you might have to choose a differend colour setting in the PreForm software this might take some experimenting. Lighter colours need lighter colour settings in the software. Beware,the darker settings in the software makes the machine emit more energy, so don't use the Black setting for a Clear/transparent colour 

Recommended retail price $130+GST each.

 

Pigment Set

Our Pigment Set contains four of 20ml dropper bottles of pigments.
The pigments are of our own design and produced by ourselves. The pigments are of the finest quality and have an exceptional fine particle structure. The four colours of the set enables you to mix any colour of the rainbow.

To give you an idea of the pigment strength, we use about 4ml red pigment per kg. to make our SB Red and our IB Red.

Usage: Just measure the amount of resin you need to fill your Vat. Slowly drip the amount of pigment to the resin (stir after every few drops) until you have reached the colour you want to achieve. Don't forget to make a note of the amount of drops for future use.
You can mix the colours to make any other colour.
Don't forget: You can always add some more pigments, but you can never take them out!

​Be careful not to spill, stains are very hard to remove. Wear gloves!

Recommended retail $22+GST each (4 x 20ml)

 

Sample Pack

FunToDo Sample Pack

To give new users the opportunity to get acquainted with our products, we have developed the Sample Pack.
Without having to buy a whole bottle, you can test a selection of our most popular blends.
The Sample Pack contains 3x 250ml bottles. Snow White, Industrial Blend Unpigmented, and Industrial Blend Black.
To experiment with colours, we have added 4x 5ml FTD pigments Red, Blue, Yellow and Black. This way you can create every colour you want with the IB unpigmented and Snow White.
(5ml of FTD pigment is more than enough for 1Kg. of resin.)

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.